 
Built for the construction period between framing and sale, Fortify is a clear, concentrated mold and moisture resistant, breathable sealer for the protection of the framed structure including sub flooring, joist systems, wall cavities and sheathing. It provides a 12 month warranty to the builder.
 
From the time that construction materials hit the lumber yard to the time that a building is dried in, the natural environment drives moisture content up. Increased moisture content on primarily wood or wood-based materials supports mold growth. The result can be increased costs to clean the materials during the construction process resulting in less net profit and potential delays. If discovered after project completion, even higher demolition, remediation and reconstruction costs are probable. Fortify, suitable for pre-construction or spray-in-place applications. It protects construction materials prior to dry-in with a breathable but mold and moisture resistant barrier.

*Treated Articles Exemption - This product contains an EPA registered antimicrobial to protect the coating from non-public health fungi and odor causing bacteria. No public health claims are being made.

Fortify CONSTRUCTION CONTROL

Name: Fortify CONSTRUCTION CONTROL
Brand: Enviroguard

$265.00

1 Foot

Quantity

Concentrated

Breathable to prevent dry or wet rot conditions

Applies and dries to a semi-transparent finish for quality control

Acts as a moisture barrier to prevent moisture content increases

Forms a tough, resistant barrier to moisture and contaminants

Tintable, Water-based and non-flammable
From the time that construction materials hit the lumber yard to the time that a building is dried in, the natural environment drives moisture content up. Increased moisture content on primarily wood or wood-based materials supports mold growth. The result can be increased costs to clean the materials during the construction process resulting in less net profit and potential delays. If discovered after project completion, even higher demolition, remediation and reconstruction costs are probable. Fortify, suitable for pre-construction or spray-in-place applications. It protects construction materials prior to dry-in with a breathable but mold and moisture resistant barrier.

Use on structural and construction materials such as treated and untreated lumber, plywood, OSB, particle board, cement board, wallboard, composite construction materials and metals. Probable areas of use are structural surfaces within the building envelope including warm-side sheathing, trusses, framing, joists, plates, pillars, posts, beams, gypsum board and backer board.
Dilute 2 parts water to 1 part Fortify Concentrate. For warranted best results, apply at 160 ft2 per gallon (2400 ft2 per pail = 10 wet mils) based upon location, surface texture, porosity, age and application method. For best results, apply two even coats perpendicularly to each other (i.e. vertically and horizontally). Allow the first coat to dry to the touch before the second application. Does not include loss from over-spray or over-use.
Fortify should be applied directly to the surface to the point of saturation but not past the point of run-off. Once diluted, Fortify is a low viscosity sealant. Apply the diluted solution of Fortify with a pump sprayer, fogger, electrostatic sprayer or airless sprayer (or any other similarly manual or powered equipment).

For storm and water damage response, use a 2:1 dilution (2 parts water to 1 part Fortiy). Apply to the point of run-off at a rate of up to 300 ft2 per gallon of ready-to-use solution.

828.548.3900

Fortify CONSTRUCTION CONTROL

Features

Uses

Coverage

Instructions